maxcon003002
maxcon2b001006
maxcon001009-1
DSCF1947
  • 06/07/2022 1:12 pm
  • Georgia
  • Sell
$89.95

The OCF-380 is designed for low to medium power levels. It will work well on the 80, 40 ,20, 17,12, 10 and 6 meter ham bands with no need for tuning.
The antenna can be mounted as a dipole or inverted vee. It is complete, cut, tuned, and ready to hang.

The OCF-3K80 is complete with a 4 to 1 Balun. It can be fed with standard 50 ohm coax . It is 133 feet long. 45 feet on one Leg and 88 feet on the other.

The antenna wire is composed of 2 conductors with 7 strands per side.
4 strands are copper and 3 strands are steel. The wire is rated at 200 lbs tensile strength.
This wire will not kink and is very easy to handle.

The Center insulator is made of quality schedule 40 PVC and Quality zinc plate eyebolts

For the size, weight and cost, I simply do not think there is a better performing antenna when the user is limited to a single or wire type antenna. Multi-band, high performance and high power handling, with utmost simplicity and ease of use. You will not be disappointed. Note: On 80 meters the antenna is resonant at 3.6 Mhz   $89.95

Features:

  • Specifications:
  • Operating bands 6, 10, 12, 17, 20, 40 & 80 meters without a tuner.
  • Resonant Freq. on 80 meters is 3.6 MHz Bandwidth 10m - 2000kHz, 20m - 500kHz, 40m - 400kHz, 80m 200kHz typical, (VSWR < 2.0:1) (Max Operating power SSB 2000 Watt PEP with a 25 % duty cycle 1000 Watt PEP with a 50% duty cycle 500 Watt CW 250 Watt FT 8 and RTTY Typical impedance 40 ohm - 60 ohm (depending on installation height and configuration)
  • Gain 0.0 to 6 dBd
  • Effective Gain 12 dBi Typical (when mounted at 1 wavelength height)
  • VSWR 1.5:1 (typical)
  • Total length 133 feet.