DSCF2110-1
DSCF2112-1
  • 11/14/2022 12:44 pm
  • Georgia
  • Sell
$495

SPECIFICATIONS

GENERAL
Type: HF receiver
Frequency range
depending on market:
0.1-30 MHz (USA)
2-30 MHz (Australia)
Tuning steps: 10 / 50 Hz, 1 KHz
Frequency stability: Less than 200 Hz @ switch-on
Less than 30 Hz after 60 mins warmup
Mode: AM / SSB / CW / RTTY (FM option)
Channels / memory management: 32 regular
1 scan edge pair
Power supply: Mains: 100 / 117 / 200 / 220 / 235 VAC (3-pin IEC C14 connector)
or 12-14 VDC option
Current drain / power consumption: Max 30 VA @ mains
Max ? mA @ 13.8 VDC
Antenna impedance / connector: Ant 1: Hi-Z / Spring terminal (0.1-1.6 MHz only)
Ant 2: 50 ohm / SO-239
Dimensions (W*H*D): 286*111*276 mm (11.25*4.37*10.87″)
Weight: 7.5 Kg (16.53 lb)
Other features: PBT and notch filter. NB. Dimmer. Tone control. Attenuator.
Continuous bandwidth control at 4th IF. CI-IV computer control.
RECEIVER SECTION
Receiver system: Triple conversion superheterodyne (FM option)
1st IF: 70.4515 MHz
2nd IF: 9.0115 MHz
3rd IF: 455 KHz
Quadruple conversion superheterodyne (AM/SSB/CW/RTTY)
1st IF: 70.4515 MHz
2nd IF: 9.0115 MHz
3rd IF: 455 KHz
4th IF: 9.0115 MHz
Sensitivity: AM (10 dB S+N/N, preamp on)
0.1-1.6 MHz: 3 uV
1.6-30 MHz: <0.5 uV
SSB/CW/RTTY (10 dB S+N/N, preamp on)
0.1-1.6 MHz: 1 uV
1.6-30 MHz: <0.15 uV
FM (10 dB SINAD, preamp on)
1.6-30 MHz: <0.3 uV
Selectivity: AM: 2.7-6 KHz (-6 dB), 15 KHz (-50 dB)
SSB/CW/RTTY: 0.5-2.3 KHz (-6 dB), 4.2 KHz (-60 dB)
CW-N/RTTY-N: 500 Hz (-6 dB), 1.5 KHz (-60 dB), with optional FL-32
FM: 15 KHz (-6 dB), 25 KHz (-60 dB)
Image rejection: >60 dB
AF output power / speaker: 3 W at ?% distortion / 8 ohm